Everyone knows that quick-freezing equipment can't run normally all the time, there will always be some wear or occasional problems, so repairing the equipment becomes a big problem, but many people rarely repair these things, so now introduce Here's how to perform some simple repairs on the Quick Freezing Equipment.
In fact, if you really encounter a failure during the process of using the quick-freezing equipment, then you must stop using it. Check the source of the fault of the quick-freezing equipment first. After checking the relevant basic conditions, we need technical repairs. If you do not know how to solve the problem, then it is best to consult the after-sales service department of the quick freezing equipment manufacturer or find a professional repair point for repairs, but if you are unable to contact the maintenance personnel in emergency use, you need to do it yourself. Let's introduce the next point of quick freezing equipment maintenance knowledge.
When there is a problem with the quick freezing equipment, we must first check whether it is a problem with the line, because most of the time, it is caused by the aging of the line and the equipment cannot run normally. When checking, you must first remove the plug and disconnect it. Turn off the power of the equipment to prevent damage due to leakage during inspection. An electrician pen is needed during the inspection to check whether the quick-freezing equipment has been connected to the electricity. If the electricity is connected, disconnect the equipment circuit and reconnect it. Secondly, check whether the valve opening is a bit loose. If it is loose, air leakage will occur, which will cause the quick freezing equipment to be blocked. Finally, look at the fan blades of the equipment. If the fan blades are broken, you need to replace the equipment.
How to disassemble the quick freezing equipment. Generally speaking, the first thing to do to repair this thing is to learn to disassemble it. When disassembling, please follow the steps from the outside to the inside strictly. First remove the outer protective shell, and then slowly disassemble the inside. Check what is wrong with the inside of the quick-freezing equipment. Is it blocked or the line? The problem is still because the parts are worn. Be careful not to disturb the wiring when the quick freezing equipment is disassembled.
Buying Zhejiang Guanfeng Food Machinery Co., Ltd.'s equipment in this area is more secure, and we also have advanced IQF Freezing technology. You will never regret choosing us.